6.2 min readCategories: Blog

CarCal QuickCal 5.0: Is This Portable ADAS Calibration System Right for Your Shop?

The Diagnostic Snapshot

What it is:

The CarCal QuickCal 5.0 is a portable physical ADAS calibration frame designed for supported static calibration procedures.

What it includes:

A foldable frame, integrated laser positioning and physical calibration targets depending on the configuration purchased.

What it does not replace:

The diagnostic tablet and ADAS software used to communicate with the vehicle and initiate supported calibration procedures.

Best fit for:

Auto glass shops, collision centers, independent repair facilities, mobile ADAS businesses and shops that don’t want a permanent calibration frame taking up a bay.

What the tech should know:

Portable doesn’t mean “set it anywhere.” Vehicle position, target placement, floor conditions and other OEM requirements still matter.

Bottom line:

QuickCal is worth a look if you need static ADAS capability but want equipment that can move, fold up and get out of the way when the calibration is done.

You finish the repair.

Everything looks good.

Then the vehicle still has to leave because the ADAS calibration needs to happen somewhere else.

If that’s starting to happen more often in your shop, you’ve probably already had the conversation:

Should we just start doing these calibrations ourselves?

Maybe.

But before buying equipment, the better question is:

What kind of calibration setup actually fits the way your shop works?

That’s where the CarCal QuickCal 5.0 comes in.

What Is the CarCal QuickCal 5.0?

The QuickCal 5.0 is a portable physical calibration frame used for supported static ADAS calibration procedures.

Current system specifications include:

  • Approximately 47-pound frame
  • Foldable construction
  • Integrated laser alignment
  • Pitch and roll adjustment
  • Setup designed to take less than 60 seconds
  • Physical ADAS calibration targets
  • Support for in-shop and mobile workflows

The big difference between QuickCal and a larger permanent calibration structure is pretty obvious once you look at it:

It can move.

That matters if your calibration bay also happens to be your alignment bay, suspension bay or whatever bay happened to be open that morning.

Why Portability Matters

Shop space disappears quickly.

A large fixed calibration system may make perfect sense for a dedicated ADAS center performing calibrations all day.

For a smaller repair shop, collision center or glass business?

Maybe not.

QuickCal can be set up when needed, then folded, moved and stored after the job.

That makes it useful in shops where the same floor space needs to handle more than one type of work.

For Mobile ADAS Work

Portability matters even more if the calibration equipment needs to leave the building.

A mobile tech isn’t just asking:

Can this equipment perform the calibration?

They’re also asking:

Can I realistically load this thing, move it and set it back up at another location?

At roughly 47 pounds with a foldable design, QuickCal is built with that type of workflow in mind.

auto technician lifting the car with lever

Fast Setup Is Nice. Correct Setup Matters More.

QuickCal is designed for setup in under 60 seconds.

That’s useful.

But nobody gets extra credit for setting up calibration equipment quickly if it’s in the wrong place.

ADAS calibration still depends on precise positioning according to the vehicle manufacturer’s procedure.

That can include:

  • Distance
  • Target height
  • Lateral position
  • Vehicle centerline
  • Floor conditions
  • Lighting
  • Vehicle preparation
  • Other procedure-specific requirements

QuickCal’s integrated laser system is designed to help the technician position the equipment more efficiently and consistently.

It doesn’t replace the OEM procedure.

It helps the tech carry it out.

What About the Targets?

Target count sounds impressive on a product sheet.

Vehicle coverage matters more.

The current QuickCal 5.0 full-system configuration includes 23 physical targets — 19 metal and four magnetic — supporting procedures for manufacturers including:

  • Toyota
  • Mitsubishi
  • Infiniti
  • Nissan
  • Mercedes-Benz
  • Mazda
  • Honda / Acura
  • Subaru
  • Audi
  • Volkswagen
  • Porsche
  • Hyundai
  • Kia

Additional target coverage may be available depending on the manufacturer and configuration.

Before buying, compare target coverage against the vehicles actually coming through your shop.

If you see Toyota, Honda, Subaru and Hyundai every week, that’s useful information.

If half the targets in a package are for vehicles you almost never touch, that’s useful information too.

Start with your repair history.

QuickCal Is the Physical Side of the Calibration

This distinction matters.

CarCal supplies the physical calibration equipment:

  • Frame
  • Positioning hardware
  • Targets

The diagnostic tablet and software are separate.

The frame establishes the physical reference needed for supported static calibration procedures.

The diagnostic platform communicates with the vehicle and initiates or guides the supported calibration routine.

You may need both to complete the workflow.

So don’t look at a calibration frame by itself and assume that’s the entire ADAS setup.

Who Is QuickCal 5.0 Best Suited For?

Auto Glass Shops

Windshield-mounted cameras make ADAS calibration especially relevant to glass work.

If you’re regularly replacing ADAS-equipped windshields and then sending the calibration somewhere else, a portable system may help you complete more of the job internally.

For mobile glass businesses, the portability becomes even more important.

Collision Centers

ADAS can easily become the last step holding up a completed repair.

A portable frame can give a collision center calibration capability without requiring the equipment to live in one bay permanently.

That’s especially helpful if calibration volume is steady but not high enough to justify a dedicated area.

Independent Repair Shops

Late-model repair work increasingly overlaps with ADAS.

If you’re already running into calibration requirements after suspension, steering, alignment or sensor-related repairs, portable equipment may be a practical way to add capability without completely redesigning the shop.

Mobile Calibration Businesses

This one is straightforward.

If your equipment has to travel, physical size and weight matter.

A 47-pound foldable frame is a very different proposition than trying to move a large fixed calibration structure from shop to shop.

Does Your Shop Actually Need One?

Before buying QuickCal — or any ADAS system — look at your own workload.

Ask:

  • How many calibrations are we currently outsourcing?
  • Which vehicles do we see most?
  • What procedures are we running into?
  • What diagnostic equipment do we already own?
  • Does the calibration equipment need to move between bays?
  • Does it need to travel between locations?
  • Do we have an appropriate calibration environment?
  • Are our technicians prepared to follow OEM procedures?
  • Is our calibration volume increasing?

You may need a complete system.

You may already own part of what you need.

You may discover outsourcing still makes more sense.

That’s fine too.

Buying more equipment doesn’t automatically create a better ADAS program.

Buying equipment that actually fits your workload does.

auto workshop owner in his shop

The Equipment Doesn’t Do the Thinking for You

This is worth calling out.

Owning an ADAS calibration frame doesn’t automatically mean every vehicle that comes through the door can be calibrated.

The tech still needs to determine:

Whether calibration is required

  • Which procedure applies
  • How the vehicle needs to be prepared
  • Which target is required
  • What measurements and positioning are needed
  • Whether static or dynamic calibration applies
  • How the completed calibration should be verified

QuickCal provides the physical equipment for supported static procedures.

The OEM procedure still runs the show.

Is the CarCal QuickCal 5.0 Right for Your Shop?

QuickCal makes the most sense when portability solves an actual problem.

Maybe your shop doesn’t have room for a permanent ADAS structure.

Maybe your glass techs travel.

Maybe your collision center needs calibration capability but still needs the bay for other work.

Maybe you’re simply outsourcing enough static calibration work that it’s time to look at your options.

Start with:

  • Your vehicle mix
  • Calibration volume
  • Existing diagnostic equipment
  • Available space
  • Technician workflow
  • Required target coverage

Then decide whether QuickCal fits.

Not sure which targets or configuration match the vehicles you’re seeing? Agile Truck & Auto Tools can help you sort through the equipment without turning it into homework.

Diagnostic Tools. Expert Solutions. Stay Agile.

CarCal QuickCal 5.0 FAQs

Which vehicles does QuickCal support?2026-10-12T06:05:35-04:00

Coverage depends on the target, diagnostic equipment, vehicle and specific procedure. The current full system includes targets supporting several manufacturers, with additional target options available for some applications.

Can QuickCal be used for mobile ADAS calibration?2026-10-12T06:05:21-04:00

Its lightweight, foldable design makes it well suited to mobile and space-conscious workflows. The calibration location still needs to meet the applicable OEM requirements for the procedure.

Does QuickCal come with ADAS targets?2026-10-12T06:05:10-04:00

The current full-system configuration includes 19 metal targets and four magnetic targets. Exact configurations can vary, so confirm what’s included before purchasing.

How long does QuickCal take to set up?2026-10-12T06:04:46-04:00

The QuickCal 5.0 is designed for setup in under 60 seconds. Correct positioning still depends on following the applicable OEM procedure.

How portable is the QuickCal 5.0?2026-10-12T06:04:35-04:00

The system weighs approximately 47 pounds and uses a foldable design intended to make transportation and storage more practical.

What is the CarCal QuickCal 5.0?2026-11-09T16:55:04-05:00

The CarCal QuickCal 5.0 is a portable ADAS target-positioning system designed for professional camera calibration procedures.

It uses a collapsible stand, integrated laser alignment, bumper jigs, and compatible calibration targets to support accurate positioning according to manufacturer requirements.

2026-10-28T11:31:59-04:00
Go to Top